Table of Contents
Advertisement
LT-300 User & Installation Manual
Manual mode:
Step 1:
Start cmd.exe (Windows command prompt).
Step 2:
Navigate to the directory where the LT-Service Tool is stored.
Step 3:
In the cmd prompt write: "LT-Service_vX.XX.exe –p COM25 –b 4800" to launch the program
(depends on the version of the LT-Service Tool (X.XX = 1.01), PC COM port, and the baud rate
for which the LT-300 GNSS Receiver is configured).
LT-Service Tool functions
The key functions of the LT-Service Tool are listed here. For a complete list of functionality and commands,
see App. F – LT-Service Tool on page 38.
Key features:
·
Configuration of the GNSS Receiver (GPS, SBAS, QZSS, BeiDou and GLONASS)
o Default configuration: GPS, SBAS, QZSS, and GLONASS
·
Configuration of NMEA 2000 'Open' or 'Terminated' (factory default: 'Open')
·
Status of the LT-300 GNSS Receiver
o Power On Self-Test (POST)
o Continuous Monitoring (CM)
o General status
·
Monitoring of NMEA 0183 data
o Live NMEA 0183 sentences (to inspect valid output from the LT-300 GNSS Receiver)
·
Live navigations data
o Navigation window to display live data (up-date-rate = 1 second)
·
Automatic generation of a Diagnostic Report
·
Upload of new application software
List of commands
All available commands in the LT-Service Tool are described in details when using the "help" command, see
App. F – LT-Service Tool on page 38. Some of the most used commands are presented here:
"help"
"set gnss receiver <id> <id>" Select the following type of satellites: GPS, SBAS, QZSS, GLONASS or BeiDou
"set nmea2000 term <id>" Set NMEA 2000 bus termination: open or close
"diag"
"upload <filename>"
"reboot"
"post", "event" & "status"
Lars Thrane A/S
Lists all commands supported by the LT-Service Tool and the LT-300 GNSS
Generate a Diagnostic Report
Upload a new application image (absolute or relative file path)
Reboot device (for configuration to take affect)
Prints Power On Self-Tests (POST), events (CM) and status
www.thrane.eu
Configuration using LT-Service Tool
27 of 39
Advertisement
Table of Contents
