Table of Contents
Advertisement
LT-300 User & Installation Manual
Installation
Step 5: Fasten the pole mount by securing the two screws as illustrated in Figure 15 (pinol and safety lock
screw).
IMPORTANT: The pinol screw used for fastening the pole mount to the 1" tube shall not exceed 0.8 NM
(0.60 lbs/ft). The Safety lock screw used for fastening the pole mount to the LT-300 GNSS Receiver shall not
exceed 0.6 NM (0.44 lbs/ft).
F
15: P
M
5 (
)
IGURE
OLE
OUNT INSTALLATION STEP
SECURING SCREWS
Lars Thrane A/S
www.thrane.eu
12 of 39
Advertisement
Table of Contents
