Table of Contents
Advertisement
LT-300 User & Installation Manual
Water intrusion
It is recommended not to use pneumatic tools for cleaning the LT-300 GNSS Receiver, especially at a short
distance, and directly at the split between the top and bottom part of the enclosure.
Pole or Roof Mount installation
It is possible to use either a pole or roof mount, when installing the LT-300 GNSS Receiver, see Figure 5 (roof
mount) and Figure 6 (pole mount).
F
6: LT-300 GNSS R
IGURE
The following two sub-chapters will in details, step-by-step, describe how to complete an installation with
either a pole or roof mount
·
Pole mount installation, see Pole Mount installation on page 7
·
Roof mount installation, see Roof mount installation on page 14
NOTE:
The LT-300 GNSS Receiver is delivered with both a Pole Mount and a Roof Mount. For further
details on what is in-the-box, see
Lars Thrane A/S
P
M
ECEIVER WITH
OLE
OUNT
Unpacking
www.thrane.eu
F
5: LT-300 GNSS R
IGURE
.
on page 5.
Installation
R
M
ECEIVER WITH
OOF
OUNT
6 of 39
.
Advertisement
Table of Contents
