Lars Thrane LT-300 User & Installation Manual page 26

LT-300 User & Installation Manual
Step 6: Use the two self-cutting stainless screws to mount the Roof Mount against the roof. Secure the LT-
300 GNSS Receiver and Roof Mount with the safety lock screw as illustrated in Figure 26. Connect the
communication cable.
Step 7: The mounting is now completed. Install the simple-cut end of the communication cable according to
the details provided in Connecting on page 19.
Lars Thrane A/S
F 26: R M
IGURE OOF OUNT INSTALLATION STEP
CONNECT THE COMMUNICATION CABLE
F 27: R M
IGURE OOF OUNT INSTALLATION STEP
-
SIMPLE CUT END OF THE COMMUNICATION CABLE
www.thrane.eu
6 (F
ASTEN SCREWS AND
)
7 (I
NSTALL THE
)
Installation
18 of 39