Lars Thrane LT-300 User & Installation Manual page 22

LT-300 User & Installation Manual
Roof mount installation
Step 1: Locate an appropriate location for the roof mount installation.
IMPORTANT: Make sure that nothing is blocking the GNSS satellite signals (see Mounting and installation
considerations on page 5 for details) and that no compass is within 0.3 m. / 1 ft. of the LT-300
GNSS Receiver.
Step 2: Measure and mark the installation holes in accordance with the drawing showed in Figure 18. Use
the enclosed two stainless A4 screws for mounting.
Lars Thrane A/S
F 17: R M
IGURE OOF OUNT INSTALLATION STEP
)
APPROPRIATE LOCATION
F 18: R M
IGURE OOF OUNT INSTALLATION STEP
(M
EASURE AND MARK THE INSTALLATION HOLES
www.thrane.eu
1 (L
OCATE AN
2
)
Installation
14 of 39