Table of Contents
Advertisement
LT-300 User & Installation Manual
Quick Installation Guide
LT-300 Global Navigation Satellite System Receiver
Congratulations on your purchase of the LT-300 Global Navigation Satellite System (GNSS) Receiver!
The LT-300 GNSS Receiver is capable of providing accurate positions down to 2 meters. The LT-300 GNSS
Receiver outputs navigation data (up to 10 Hz): UTC time and date, position (latitude and longitude), course
over ground, speed over ground, GNSS satellite information, and magnetic variation.
NOTE:
Refer to the 95-100229 LT-300 User & Installation Manual for detailed information on
installation requirements and guidance.
Unpacking
Unpack the LT-300 GNSS Receiver and check that the following items are present:
·
LT-300 GNSS Receiver
·
LT-300 GNSS Pole & Roof Mount (incl. screws for installation)
·
10m Cable Multi 8-pin Simple-Cut (M)
·
Screw-in Conn. NMEA 2000 Micro-C (M)
·
Quick Installation Guide
·
Unit Test Sheet
Installation
Mounting
Mounting considerations:
·
Mount the unit horizontally
·
Mount the unit with free line of sight to GNSS satellites. If the Roof Mount is used for below deck
installation, make sure that the unit is capable of receiving signals from the GNSS satellites
·
Mount the unit on a rigid structure with a minimum of exposure to vibration and shock
·
Mount the unit in an area with an ambient temperature between -40°C and +55°C (-40°F and +131°F)
·
The minimum compass safe distance is 0.3 m. (1 ft.)
IMPORTANT: The pinol screw used for fastening the pole mount shall not exceed 0.8 NM (0.6 lbs/ft).
F
1: LT-300 GNSS R
IGURE
M
OUNT INSTALLATION
Lars Thrane A/S
P
ECEIVER WITH
OLE
F
M
www.thrane.eu
Refer to the 95-100229 LT-300 User &
Installation Manual for Safety Instructions.
2: LT-300 GNSS R
IGURE
ECEIVER WITH
OUNT INSTALLATION
Quick Installation Guide
WARNING
R
OOF
3 of 39
Advertisement
Table of Contents
