Advertisement
Service Manual
Model No: DWL Series
Using the Dishwasher with the Upper
Rack Removed
1.
Unsnap and remove the end cap on each side
of the rails.
2.
Pull the rack straight out and off the rails.
3.
Replace the end caps.
4.
Push the rails all the way back into
the dishwasher.
Unsa
5.
Slide the shower nozzle attachment over
the spout.
6.
The dishwasher is now ready for use.
Note: Always use the shower nozzle when the
upper rack is removed.
Middle Spray Arm
1.
Check holes in spray arm for bits of
china, seeds, and other foreign matter.
2.
Check spray arms for rotation.
Removal and Replacement
1.
Pull upper rack all the way out.
2.
Remove plastic bottom of middle spray
arm. This will allow the middle spray arm
and bearing to be removed.
Install middle spray arm with spray jets
facing the upper rack. Place bearing between
spray arm screw and bottom of the middle arm.
Note: If the upper rack experiences poor cleaning
problems, ensure the middle spray arm is turning
freely. If not, disassemble the middle spray arm and
clean the bearing surface, then reassemble.
Issue
Rev.
- 14 -
Advertisement
