HP E4418B User Manual page 91

To select both an analog and digital display press
are displayed. Select the format of one window to analog and the other to
digital as previously described.
To indicate if the measurement reading is outwith the minimum or
maximum values set for the analog meter, a warning message is
displayed. The analog meter also displays a digital reading. This digital
reading allows you to easily set the appropriate minimum and maximum
values for the analog display.
Note
HP E4418B User's Guide
shown in front of
multiplier has been selected confirms the entry.
The analog display does not indicate as much measurement data
as the digital display. That is, it does not indicate when duty cycle,
range hold, offset or relative mode are enabled. In addition, it does
not indicate if the measurement is within the test limits if any are
set.
Selecting a Digital or Analog Display
or . Pressing or
% W %
Power Meter Operation
after the correct
W
until two windows
2-51