HP E4418B User Manual page 56

Power Meter Operation
Making Measurements with the HP E-Series Power Sensors
Example
To make a measurement using an HP E-series power sensor. The
frequency of the signal to be measured is 100 MHz.
• Disconnect the power sensor from any source.
Zero
• Press .
Cal
• Press .
Zero
• Connect the power sensor to the POWER REF output.
• Press .
Cal
Frequency
• Press
Cal Fac
hardkeys to enter 100. Press
• Connect the power sensor to the signal to be measured.
• The measurement result is now displayed.
2-16
, . Use the
Freq
.
MHz
, , and
HP E4418B User's Guide