Temperature And Humidity Conditions - Canon imageCLASS MF3010 Starter Manual

1 2
Preface Installing the Machine
• There are burn marks on the power plug.
- The blade on the power plug is deformed or broken.
- The power is turned OFF or ON when bending the power cord.
- The coating of the power cord is damaged, cracked, or dented.
- A part of the power cord becomes hot.
• Check regularly that the power cord and plug are not handled in the following
manner. Failure to do so can result in a fire or electrical shock.
- The power connector is loosened.
- Stress is being applied to the power cord by a heavy object or by fixing it with
staples.
- The power plug is loosened.
- The power cord is tied in a bundle.
- A part of the power cord is put in an aisle.
- The power cord is put in front of the heating appliance.
CAUTION
• The fixing unit and its surroundings inside the machine become hot during use.
When removing jammed paper or when inspecting the inside of the machine, do
not touch the fixing unit and its surroundings, as this may result in burns.
• When removing jammed paper or when inspecting the inside of the machine, do
not expose yourself to the heat emitted from the fixing unit and its surroundings
for a prolonged period of time. Doing so may result in low temperature burns,
even though you did not touch the fixing unit and its surroundings directly, as
this may result in burns.
• If paper is jammed, remove the jammed paper so that any pieces of paper do
not remain inside the machine. Also, do not put your hand in an area other than
indicated areas, as this may result in personal injuries or burns.
• When removing jammed paper or replacing a toner cartridge, be careful not to
get any toner on your hands or clothing, as this will dirty your hands or clothing.
If toner gets on your hands or clothing, wash them immediately with cold water.
Washing with warm water sets the toner, making it impossible to remove the
toner stains.
• When removing jammed paper, be careful not to allow the toner on the paper to
scatter. The toner may get into your eyes or mouth. If toner gets into your eyes or
mouth, wash them immediately with cold water and consult a physician.
• When loading paper or removing jammed paper, be careful not to cut your hands
with the edges of the paper.
• When removing a toner cartridge, remove the toner cartridge carefully so as to
prevent the toner from scattering and getting into your eyes or mouth. If toner
gets into your eyes or mouth, wash them immediately with cold water and
consult a physician.
• Do not attempt to disassemble the toner cartridge. The toner may scatter and
get into your eyes or mouth. If toner gets into your eyes or mouth, wash them
immediately with cold water and consult a physician.
• If toner leaks from the toner cartridge, be careful not to inhale the toner or allow
it to come into direct contact with your skin. If the toner comes into contact with
your skin, wash with soap. If the skin becomes irritated or you inhale the toner,
consult a physician immediately.
3
Connecting to a Computer and
Installing the Drivers
Consumables
• Do not dispose of used toner cartridges in open flames. This may cause the toner
• Do not store toner cartridges or paper in a location exposed to open flames. This
• When disposing of a toner cartridge, place the toner cartridge into a bag to
• If you accidentally spill or scatter toner, carefully gather the toner particles
• Keep the toner cartridges and other consumables out of the reach of small
• Do not attempt to disassemble the toner cartridge. The toner may scatter and
• If toner leaks from the toner cartridge, be careful not to inhale the toner or allow
• Do not pull out the sealing tape forcefully or stop at midpoint, as this may cause
Others
• If you are using a cardiac pacemaker
In order to use this machine in a safe and trouble-free manner, install the machine in
a place that fulfills the following conditions. Also, read the remarks carefully.

Temperature and Humidity Conditions

• Temperature range: 10 to 30°C
• Humidity range: 20 to 80 % RH (no condensation)
Protecting the machine from condensation
• To prevent condensation from forming inside the machine in the following cases,
• If water droplets (condensation) form inside the machine, this can result in paper
When using an ultrasonic humidifier
When you are using an ultrasonic humidifier, it is therefore recommended that you
use purified water or other water that is free of impurities.
If you use tap water or well water, impurities in the water will be dispersed through
the air. This can be trapped inside the machine, causing degradation in print quality.
Appendix
WARNING
to ignite, resulting in burns or fire.
may cause the toner or paper to ignite, resulting in burns or fire.
prevent the toner from scattering, and then dispose of the toner cartridge
according to local regulations.
together or wipe them up with a soft, damp cloth in a way that prevents
inhalation.
Never use a vacuum cleaner that does not have safeguards against dust
explosions to clean up spilled toner. Doing so may cause a malfunction in the
vacuum cleaner, or result in a dust explosion due to static discharge.
CAUTION
children. If the toner or other parts are ingested, consult a physician immediately.
get into your eyes or mouth. If toner gets into your eyes or mouth, wash them
immediately with cold water and consult a physician.
it to come into direct contact with your skin. If the toner comes into contact with
your skin, wash with soap. If the skin becomes irritated or you inhale the toner,
consult a physician immediately.
toner to spill out. If toner gets into your eyes or mouth, wash them immediately
with cold water and consult a physician.
WARNING
This machine generates a low level magnetic field. If you use a cardiac pacemaker
and feel abnormalities, please move away from this machine and consult your
physician immediately.
Installation Requirements and Handling
IMPORTANT
let the machine adjust to the ambient temperature and humidity for at least two
hours before use.
- When the room where the machine is installed is heated rapidly
- When the machine is moved from a cool or dry location to a hot or humid
location
jams or poor print quality.
11