Power Supply - Canon imageCLASS MF3010 Starter Manual

1 2
Preface Installing the Machine
Symbols Used in This Manual
WARNING
Indicates a warning concerning operations that may lead to death or injury to
persons if not performed correctly. To use the machine safely, always pay attention
to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons if
not performed correctly. To use the machine safely, always pay attention to these
cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items
carefully to operate the machine correctly, and avoid damage to the machine or
property.
Indicates an operation that must not be performed. Read these items carefully, and
make sure not to perform the described operations.
Keys and Buttons Used in This Manual
The following symbols and key names are a few examples of how keys to be pressed
are expressed in this manual.
• Operation panel keys: [Key icon]
Example: [ ]
• Buttons and items on the computer display: [Preferences]
Important Safety Instructions
As these instructions are intended to prevent injury to the user and other persons
or to prevent destruction of property, always pay attention to these instructions and
operational requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any
operation unless otherwise specified in the manual.
Installation
WARNING
• Do not install the machine in a location near alcohol, paint thinner, or other
flammable substances. If flammable substances come into contact with electrical
parts inside the machine, this may result in a fire or electrical shock.
• Do not place the following items on the machine.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled with water or liquids
If these items come into contact with a high-voltage area inside the machine, this
may result in a fire or electrical shock.
If these items are dropped or spilled inside the machine, immediately turn off the
power switches of the machine and computer (1) and disconnect the interface
cable if it is connected (2). Then, unplug the power plug from the AC power outlet
(3) and contact your local authorized Canon dealer.
3
Connecting to a Computer and
Installing the Drivers
• Do not install the machine in unstable locations, such as on unsteady platforms
• The ventilation slots are provided for proper ventilation of working parts inside
• Do not install the machine in the following locations, as this may result in a fire or
• When installing the machine, gently lower the machine to the installation site so
• When connecting the interface cable, connect it properly by following the
• When moving the machine, follow the instructions in this manual to hold it
• Machines with a hard disk may not operate properly when used at high altitudes

Power Supply

• Do not damage or modify the power cord. Also, do not place heavy objects on
• Keep the power cord away from all heat sources. Failure to do so can cause the
• The power cord should not be taut, as this may lead to a loose connection and
• The power cord may become damaged if it is stepped on, fixed with staples, or if
• Do not plug or unplug the power plug with wet hands, as this can result in
• Do not plug the power cord into a multiplug power strip, as this can result in a fire
• Do not bundle up or tie up the power cord in a knot, as this can result in a fire or
• Insert the power plug completely into the AC power outlet. Failure to do so can
Appendix
(1)
(2)
O F F
(3)
(1)
CAUTION
or inclined floors, or in locations subject to excessive vibrations, as this may cause
the machine to fall or tip over, resulting in personal injury.
the machine. Never place the machine on a soft surface, such as a bed, sofa, or
rug. Blocking the slots can cause the machine to overheat, resulting in a fire.
electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
as not to catch your hands between the machine and the floor or between the
machine and other equipment, as this may result in personal injury.
instructions in this manual. If not connected properly, this may result in
malfunction or electrical shock.
correctly. Failure to do so may cause you to drop the machine, resulting in
personal injury.
e-Manual "Transporting the Machine"
of about 3,000 meters above sea level, or higher.
WARNING
the power cord or pull on or excessively bend it. This can cause electrical damage,
resulting in fire or electrical shock.
power cord insulation to melt, resulting in a fire or electrical shock.
cause overheating, which could result in a fire.
heavy objects are placed on it. Continued use of a damaged power cord can lead
to an accident, such as a fire or electrical shock.
electrical shock.
or electrical shock.
electrical shock.
result in a fire or electrical shock.
(3)
9