Table of Contents
Advertisement
RESTORING FACTORY DEFAULT SETTINGS
The RadioShack 8-in-One Remote includes a Setup Code Reset program.
You can use it to restore all your programmed codes to factory settings
and delete all custom programming.
IMPORTANT: Executing this program will erase all code settings (except
upgraded codes) and all custom settings for My System, Macros, Learned
Keys, Reassigned Device Keys, Keymoved Keys, Favorite Channels, and all
device settings.
1. Press and hold P until the bottom IR segment flashes twice.
The program keys will appear:
2. Press below OTHER once. The Other programming screen will appear:
3. Using the number keys, enter 9 7 7. The bottom IR segment will flash
twice, pause and flash twice again to confirm restoration.
4. Exit programming by pressing
last-selected device menu screen.
CLEARING ALL CUSTOM PROGRAMMING
The RadioShack 8-in-One Remote contains a Custom Programming
Reset program.You can use it to remove all custom programming,
except your setup codes and reassigned device keys.
IMPORTANT: Executing this program will erase all custom settings for My
System, Macros, Learned Keys, Keymoved Keys, and Favorite Channels.
40 Restoring Factory Default Settings/Clearing All Custom Programming
8-
-O
R
IN
NE
EMOTE
P
OWERED
once. The display will return to the
B
K
Y
AMELEON
Hide quick links:
Advertisement
Table of Contents
