Advertisement
3.3) Templates for positioning the drill on rails and stock rails
to enable drilling to be carried out according to the provisions of
railway board standards:
– MPAF UIC54 on DRILLING AXIS of UIC 54 rail
– MPAF UIC60 on DRILLING AXIS of UIC 60 rail
– MPAFN UIC60 on DRILLING/NEUTRAL AXIS of UIC 60 rail
•
Note: Contact Cembre for selection of specific application
accessories.
3.4) MPAU universal positioning template suitable both for re-
pairing existing holes on various fittings, and for drilling disused
rails.
3.5) SPA positioning plates for drilling rail heads with a centre-
to-centre distance established in the Railway board standards,
without the need for marking out; for use in conjunction with
MPAF... positioning templates.
3.6) MRF clamp to be applied as a reference to the head of rails
for use, in conjunction with SPA... positioning plates, for in-line
drilling of rail heads, with established centre-to-centre distance.
3.7) VAL MPA tool case suitable for storing the accessories
indicated in 3.3 - 3.6, and the drilling tools.
6
Advertisement
