EINHELL GE-DP 7330 LL ECO Instruction Manual

Einhell Germany AG
INSTRUCTION MANUAL
TECHNICAL DATA
Input: 240V ~50Hz
Motor: 730W
Max. Flow Rate: 16,500l/h
Max. Head: 8.5m
Max. Immersion: 7m
Min. Priming Depth: 10mm
Min. Suction Depth: 1mm
Power Cord Length: 10m
Max Particle Size: Ø30mm
Outlet: 47.8mm (1½")
Water Temp.: 1°C - 35°C
Weight: 6.17kg
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR
TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE
TELEPHONE OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE
MODEL NUMBER AND DATE OF PURCHASE AVAILABLE.
A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR
CALL AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
2 YEAR WARRANTY
Your product is guaranteed for a period of 24 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: included accessories, etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
GE-DP 7330 LL ECO
2 IN 1
SUBMERSIBLE
PUMP
730W
Submersible Pump
Universal Adaptor
0716