Battery And Charger - Btwin ORIGINAL 900E User Manual

10
11 parameters
*Check the battery charge indicator when stationary. In the event that heavy assistance is required, disparities
may be noticed.
** The speed display accuracy is +/-2%.
*** Under the conditions of test protocols for a 75kg user, tyre pressures at 4 bar and respecting the 10 good
habits

BATTERY AND CHARGER

All our electric bike batteries use lithium-ion technology and are not subject to the memory effect.
Recharging the battery after each use is recommended.
Charge the battery to 100% prior to its first use.
Battery
Battery 36 V / 11.6 Ah *
* At the time of purchase, your 36 V battery is inactive. Plug in your charger to activate it.
Your battery is guaranteed for 2 years or 500 charging and discharging cycles (1 cycle = 1 charge from 0% to
100% + 1 discharge from 100% to 0%) subject to compliance with the proper conditions of use and storage.
Units
Setting parameters: Hold
Press the buttons
Push the button to go to the next parameter.
Unit: Km or miles
Blt: Adjusting the brightness (from 1 to 8)
Oft: Selection of the time before the screen is switched to standby (from 0 to 60
minutes)
Dh: Setting the number of assistance modes (from 0 to 6). it is advisable to keep
the 3 default modes.
E0 0 : no adjustment here. This parameter makes it possible to consult the error
codes appearing on the bicycle (useful for Decathlon workshops for diagnostic
assistance).
Time adjustment
and to enter into the settings.
or to select the desired value for each parameter.
Charger
8
Input: 100-240 V
Output: 42 V