Screen And Control Elements; Screen Data And Function - Btwin ORIGINAL 900E User Manual

SCREEN AND CONTROL ELEMENTS

Screen data and function

Assistance mode (0-1-2-3):
«0» no assistance. «1» is the default assistance mode. Change from one mode to
1
the next by briefly pressing on
speeds of assistance defined below:
Mode
Maximum assistance speeds***
Average autonomous range***
Switch the electric assistance of the bike on and off by pressing and holding the
2 ON / OFF
button
Battery level*: Five battery levels.
3
When the battery level is low, the indicator starts to flash.
4 LIGHTS
- Switch the lights on and off by pressing and holding the button
TOTAL: Overall distance meter
5
Switch between TOTAL meter and TRIP meter by pressing briefly on the button
TRIP: Partial distance counter (in km)
6
Switch between TOTAL meter and TRIP meter by pressing briefly on the button
and
»Pedestrian» mode: allows the bike to be moved without pedalling at a walking
7
speed of 6 km/h maximum. Warning - this mode should not be used while on the
bike. Switch pedestrian mode on and off by pressing and holding
8
Hour See Parameters (11) for time adjustment,
9
Speedometer
or Each mode corresponds to the maximum
0 1
0 km/h 17 km/h
/ 50 km (estimated with mode 2 active)
7
2 3
22 km/h 25 km/h