Table of Contents
Advertisement
Installation Instructions Janfire Pellet Boiler Integral Typ 25
If a previous boiler had a lower flue connection, then seal up the old hole and make a new hole at the right
level. The Janfire pellet boiler flue is shaped like a T-tube. The T-tube allows the boiler to be connected from
the sides or straight backwards. Assemble the draught limiter in the free hole, which gives the boiler a stable
draught and prevents condensation.
IA 32580002 EN_Ver5
© Janfire 2014
)
13(25
Advertisement
Table of Contents
