General - Janfire Integral 25 Installation Manual

3

General

The Janfire pellet boiler is designed to burn pellets in a safe, easy-to-use and environmentally friendly way.
The boiler has ten vertical tubes which effectively cool down the flue gases. The tubes are also equipped with
turbulators. The boiler is equipped with a large door. The door has a prepared hole suitable for installation of
the burner. When the door is opened the burner remains on the door. This makes it very easy to clean the
combustion chamber and burner. The door is also equipped with a safety cut-out which stops the burner
when the door is opened.
Recommended boiler temperature:
Winter: 85 ˚C +/- 3 ˚C
Summer: 83 ˚C +/- 3 ˚C
Note Pellet quality EN 14961-2 Class A1 is recommended.
Inbuilt Exhaust fan
House, Fan Option
Soot sweeping mechanism
Domestic Water Coil,
Option
Ash bottom auger screw
Bottom auger Drive
IA 32580002 EN_Ver5
Figure 31 Overview
Installation Instructions Janfire Pellet Boiler Integral Typ 25
Water mixer valve with
drive
© Janfire 2014
Hatch for access to the tubes
Operator panel
Location for Electric
Coil, Option
Pellets Burner
)
10(25