Switch Scan Screen - Fluke etherscope II Getting Started Manual

Figure 16. Switch Scan Screen
4. To select an additional switch to scan, select it from
the Select a device box.
5. By default, the nearest switch is monitored. To
prevent this switch from being monitored, tap (to
uncheck) the Show box.
6. To view details for a particular interface:
a.
b.
epi49s.bmp
c.
Network Assistant
Monitoring and Troubleshooting a Wired LAN
Select the desired interface.
The top portion of the preview pane shows
the port number, VLAN identifier, speed of
the interface, and number of connected
hosts. The lower portion displays a graph
that lets you see the relative percentage of
packets and bandwidth.
If you want to see interface statistics over a
period of time, select the desired interface.
Then tap .
The Utilization History is displayed. On this
screen, you can specify a time period during
which errors and utilization statistics for the
interface are gathered and reported.
Tap to obtain more detailed
information for the selected interface.
61