Remote Command Codes - Radio Shack TAD-1028 Owner's Manual

43-788.fm Page 22 Monday, August 16, 1999 8:19 AM
REMOTE COMMAND
CODES
Press:
0 Stop message playback
or recording.
1 Play the outgoing
message.
2 Record a new outgoing
message. When the TAD-
1028 announces "Record
announcement," begin
speaking. When you fin-
ish, press 0. The TAD
repeats the OGM.
4 Play all the recorded
messages.
6 Delete all old messages.
# Set the TAD-1028 to
answer or not answer
calls.
22
After you press
To:
Press:
(to play all messages):
4
To:
6 Delete the current
message.
7 Replay the previous
message.
8 Replay the current
message.
9 Skip forward to the next
message.
0 Stop message playback.