Playing Messages - Radio Shack TAD-1028 Owner's Manual

43-788.fm Page 18 Monday, August 16, 1999 8:19 AM
If you do not want to take the call, just let
the TAD-1028 finish recording the call-
er's message.

PLAYING MESSAGES

If there are new messages, the PLAY/
SKIP indicator flashes until all the new
messages have been played.
To play all messages, press
The TAD announces the number of
messages. If there are no messages,
the TAD announces, "No message."
Illus. showing PLAY/SKIP.
Before playing each message, the TAD-
1028 announces the message number
and the day and time when the mes-
sage was recorded. After all messages
play, the TAD announces, "End of mes-
sage(s)" then it resets to answer calls.
The PLAY/SKIP indicator lights steadily
and all messages are saved until you
delete them.
18
Repeating Messages
To replay a message, if you have lis-
tened to at least 5 seconds of it, press
OGM/REPEAT.
starts again.
Note: If you have not listened to 5 sec-
onds of the message, or the message is
not at least 5 seconds long, pressing
OGM/REPEAT
message.
.
PLAY/SKIP
Skipping Messages
To skip to the next message during
playback, press
next recorded message plays.
Pausing Message Playback
To pause message playback, press
SWER/STOP/DELETE
ing messages,
Otherwise, after pausing for 60 sec-
onds, the TAD-1028 sounds three
beeps and stops playback.
Stopping Message Playback
To stop playback at any time, press
SWER/STOP/DELETE
1028 beeps once and resets to answer
calls. The PLAY/SKIP indicator contin-
ues to flash if you have not yet listened
to all your messages.
The current message
replays the previous
once. The
PLAY/SKIP
AN-
. To resume play-
press
PLAY/SKIP
AN-
twice. The TAD-
.