Ford 2005 Mustang Disassembly And Assembly page 3

501-10-3
DISASSEMBLY AND ASSEMBLY (Continued)
5. Remove the head restraint.
1 Position the head restraint as high as it will
go.
2 Using an appropriate tool, push through the
hole on the inboard side of the head
restraint guide and release the head restraint.
Hold the head restraint up so it does not
X
engage back into the head restraint guide.
3 Release the head restraint guide on the other
side and remove the head restraint.
Seating
6. Remove the plastic rivets attaching the backrest
trim cover to the inboard and outboard
recliners.
7. Remove the backrest recliner release bezel
screw. Slide down, pull and remove the
backrest recliner release bezel and backrest
recliner release handle.
8. Release the outer J-strip at the bottom of the
backrest trim cover.
9. Release the inner J-strip at the bottom of the
backrest trim cover.
501-10-3
2005 Mustang, 12/2004