ABK i-Cooking Instruction Manual page 20

Make sure during installation and use, that
there is no tensile stress on components
and wires.
The required wiring diagram are printed on
the stickers on both the wires as the
power unit.
Installation to the electrical network must
be done with earthed power plugs.
A fuse must always be placed between
the appliance and the electrical network
like a earth leakage circuit breaker, fuse or
stop.
Installation of the cooking zones
For the various installation methods, use
the brass connectors whic are placed in
the power unit.
Attention!
Always connect the earth wire.
Act in accordance with the wiring
diagram, which can be found on the power
unit.
This appliance can only be used on a
230V ~ 50Hz electricity network.
De electrical connections of the power
unit are on the underside, at the rear. Use a
screwdriver to open the clip of the lid.
Country electrical tension connection
NL 230V~50Hz
GB 230V~50Hz
EN 20 Installation
7
5 - 6 - 7
5 - 6 - 7
Installation example
2x fase+earth
1 fase+earth
5
C
- 8
5
c
5
- 8
wire diameter
5x1.5mm2
5x2.5mm2
5
7
fuse
2x16A
25A