Related Manuals for ABK i-Cooking
Summary of Contents for ABK i-Cooking
- Page 1 INSTALLATION MANUAL i-Cooking...
- Page 2 EN 2...
- Page 3 Chapter 1 i-Cooking explanation components Chapter 2 installation instruction 2.1 adjusting the edge height 2.2 placing the housing 2.3 aligning the housing 2.4 fixing the gas volume indicator disk 2.5 placing the excenter disk 2.6 installing the burner clamps 2.7 fitting the burner installation disk 2.8 placing the pan supports...
- Page 4 EN 4 Introduction...
- Page 5 (0.18 to i-Cooking example 6.0 kW). i-Cooking can be integrated in control knob with posistion indicator almost any type of worktop, like power burner | max 3.1kW...
- Page 6 Components fitting fitting Wok burner Power | standard | simmer burner interior burner cover 17 pan support [black enamelled] 10 pan support [black enamelled] 18 burner cover 11 outer ring burner 19 spiral burner 12 gas distributor ring 20 burner mounting plate 13 cover ring air supply 21 worktop sealant 14 burner mounting plate...
- Page 7 1 Components Your i-Cooking purchase consists of: standard | power burner Components kit Per burner, a components kit is packed, including the installation materials for installing the burner and matching gas tap. This kit also includes the separate burner and gas tap components.
- Page 8 2 Installation Make sure that the underside of the 2.2 Place the housing of the cooktop under worktop, where the cooktop will be fitted, the worktop and fit it with the 3 or 4 outer is completely even and free from, dust, [temporarily] clamps/bolts, still loosened, grease and glue remains.
- Page 9 2.4 Position and then fix the under-rings burners to the aluminum plate. for the knobs, by screwing the M4 bolts Attention! Also remove the into the aluminium plate. Depending on temporarily fixing clamps now. the worktop thickness, the bolt can be tip: The clamps must be positioned over shortened slightly, to prevent the bolt the worktop, as close to the edge of the...
- Page 10 between the bolts for a correct fitting of the pan support. tip: To achieve a proper sealing of the O- ring to the worktop, the disk has a slight tension in it self. example Standard burner 2.10 Installation of the knobs and indicator plate.
- Page 11 Notes EN 11 Notes...
- Page 12 Plakhorstweg 12 NL-7008 AT Doetinchem t: +31 [0]314-320910 f: +31 [0]314-320919 e: info@abk-innovent.nl w: www.abk-innovent.nl All rights reserved. [Rev.101007] Art.nr. KDI0100008...
Need help?
Do you have a question about the i-Cooking and is the answer not in the manual?
Questions and answers