Ntp Setting; Ntp Server - NEC MH240 User Manual

• NTP SETTING

Factory Default: Disable
You can use NTP server in your network as
required.
- Press key in Standby mode. Your
phone displays the main menu.
- Press key to select "5.Setting" and then
press key.
- Press key to select "1.User Setting" and
then press key.
- Press key to select "7.Date & Time"
and then press
- Press key to select "5.NTP Setting" and
then press key.
- Press key to select "1.Disable" or
"2.Enable" and then press "OK" soft key.
NTP Setting
1.Disable
2.Enable
OK
Please confirm
TIP
administrator whether you can use

NTP Server.

You can NTP Setting menu by
TIP
pressing following keys.
Go to NTP Setting menu:
key.
Back
your network
• NTP SERVER
Factory Default: -
You can set NTP server in your network as
required.
- Press key in Standby mode. Your
phone displays the main menu.
- Press key to select "5.Setting" and then
press key.
- Press key to select "1.User Setting" and
then press
- Press key to select "7.Date & Time"
and then press
- Press key to select "6.NTP Server" and
then press
- Edit an appropriate NTP Server Address (IP
or FQDN) and then press "OK" soft key.
NTP Server
time.xxxx.com
ab
Please
TIP
administrator to know NTP Server
Address.
You can NTP Server menu by
TIP
pressing following keys.
Go to NTP Server menu:
45
key.
key.
key.
OK Clear
contact your network