How To Charge The Battery - NEC MH240 User Manual

• HOW TO CHARGE THE
BATTERY
Be sure to charge the battery when using the
phone for the first time. Use one of the
following:
Cradle
AC Adapter (direct connection)
By using the Cradle:
The phone can be charged by using the cradle.
You can also charge the battery by inserting the
battery pack alone to the slot on the cradle. This
is useful when you have a spare battery.
(1) Insert the AC adapter plug (miniUSB) into
the USB connector in the back of the cradle.
(2) Plug in the AC adapter to an appropriate AC
outlet.
(3) Place the phone and/or the spare battery
pack as shown below. When placing a
battery pack into the slot, insert it so that the
label may face downward.
USB connector
AC Adapter
AC outlet
AC adapter plug
Cradle (Battery Charger)
Face the label of the battery pack
Note:
downward when inserting the battery
pack.
Info LED
Indicate charge status
LED
Indicate charge status
Spare Battery (option)
(4) The LED on the cradle lights red, indicating
the battery is being charged. In this case, the
phone battery is not being charged and Info
LED turns off.
(5) The LED on the cradle lights green when the
spare battery is fully charged. After this,
charging to the phone battery will start and
Info LED lights red.
(6) Info LED lights green when the phone
battery is fully charged.
An empty battery pack can be fully
TIP
charged in about 4 hours.
If any abnormality is found to the
TIP
battery, the LED on the cradle
starts flashing. In this case, please
contact
administrator.
In case that you place the phone
TIP
on the cradle and insert the spare
battery into the slot at the same
time, the spare battery will be
charged first.
6
your network