Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for T Scale JW
Summary of Contents for T Scale JW
- Page 1 ‘’ Weighing Scales...
-
Page 2: Table Of Contents
JW weighing scales operation manual JW weighing scales operation manual REV: C1, June 2012 CONTENTS 1. INTRODUCTION…………………………………………………………1 2. NAME AND FUNCTIONS…………………………………………….2 2.1 Key Board………………………………………………………….2 2.2 Display………………………………………………………………2 3. OPERATION………………………………………………………….4 3.1 Basic Operation…………………………………………………….4 3.2 Percent Weighing…………………………………………………..5 3.3 Parts Counting………..…………………………………………….5 3.4 Check Weighing.…………………………………………………6 3.5 Accumulation……………..………………………………………..6... -
Page 3: Introduction
1. INTRODUCTION Display will be show previous calibration weight and start to blink The JW series weighing scales are suitable for general weighing, first digit, if necessary enter the calibration weight value by pressing MODE and % keys. -
Page 4: Display
JW weighing scales operation manual JW weighing scales operation manual REV: C1, June 2012 Saved Data By pressing M+ key, number of weighing process followed by the total To store current weight into the memory weight will be displayed for three seconds. -
Page 5: Operation
JW weighing scales operation manual JW weighing scales operation manual REV: C1, June 2012 and indicator HI or LOW will be displayed. 3. OPERATION Enter Hi limit or Low Limit value by pressing numeric keys. Press ZERO key to confirm, display will be change to normal Initial Start-up display. -
Page 6: Percent Weighing
JW weighing scales operation manual JW weighing scales operation manual REV: C1, June 2012 Remove weight from the platform. Tared weight is displayed. It 3.3 Parts Counting can set only one tare value. It can display with a minus value.
Need help?
Do you have a question about the JW and is the answer not in the manual?
Questions and answers