Canon imagePRESS C700 Update Manual page 29

7. Select "Yes"
8. Select Pattern 2
9. Select media type "LZ" from the Paper Catalog, and select "Next"
10. Highlight the cassette with the Firstchoice LZ paper installed, and select "OK".
11. Select "Start".
12. A Test Page will print. Position the Test Print on the Document Glass, as shown on
the UI.
13. Select "Start Scanning".
The process is complete.
Calibration
1. Execute Auto Correct Color Mismatch.
2. Perform Fiery (RIP) Calibration Procedure from the Fiery Button on the UI
Performing a COM TEST
After all processes are complete, a COM-TEST must be performed to ensure the device
communicates with the UGW.
In the event the COM-TEST fails we have included the following troubleshooting.
January 17, 2017