Canon imagePRESS C700 Update Manual page 28

16. Perform a Full Auto Gradation.
Note: Make sure that there are at least ten sheets or more of LZX Laser 24‐ 11 x 17 paper stock
in the drawer.
17. Confirm that the LZX Laser 24 – 11 x 17 paper type is assigned to the drawer and
click [OK].
18. Select "Start Printing".
Note: At this point the imagePRESS C700 will print two sheets of density patches on the
EX32 paper.
Registering Paper for Full Auto Correct Color Tone:
Note: the following procedure should only be performed after Full Auto Gradation has
been executed.
1. Load LZ paper in drawer one of the main engine.
2. Press "Settings/Registration" button.
3. Select "Adjustments/Maintenance".
4. Select "Adjust Image Quality".
5. Select "Auto Correct Color Tone Settings".
6. Select "Register Correction Pattern"
28 imagePRESS C700 & imagePRESS Server G100 January 2017 Update Guide