e. Select Plain 2 (91-105 g/m2).
f. Select OK to exit the Paper Type screen
g. Select OK to exit the Paper Settings screen.
3. Install Firstchoice 24lb 11x17 into another paper cassette. Register this paper as
"LZX", from the FXO Custom Media.
4. Press "Settings/Registration" button.
5. Log in as administrator (default Manager ID & Pin)
6. Select "Adjustments/Maintenance".
7. Select "Adjust Image Quality".
8. Select "Auto Adjust Gradation".
9. Select "Register Paper to Adjust".
10. Highlight "Paper to Adjust 1", select "Next".
11. Highlight "Standard", select "Next".
12. Highlight cassette with the EX32 11x17 paper installed, select "Next".
13. Select "Start Printing".
Note: At this point the imagePRESS C700 will print two sheets of density patches on
the EX32 paper.
14. Once printing is complete, highlight the cassette with the Firstchoice LZX paper
installed, and select "Next". Select "Start Printing".
15. The imagePRESS C700 will now print two sheets of density patches on the
Firstchoice LZX paper, completing the procedure.
January 17, 2017