Download  Print this page

Prepare; Connect Power; Turn Ad6000W On - Philips AD6000W/10 User Manual

Hide thumbs

Advertisement

3 Prepare

Always follow the instructions in this chapter in
sequence.

Connect power

Caution
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Before you connect the AC adaptor, make sure that you
have completed all the other connections.
Connect the AC power cord to
the DC IN socket on the back of the
unit.
the wall power socket.

Turn AD6000W on

1
Press
on the back to turn the unit on.
2
Wait for successful boot-up of the unit.
» The boot-up takes about 35 seconds.
» During boot-up, the Wi-Fi SETUP
indicator on the back of the unit blinks
green quickly.
» After boot-up, if no Wi-Fi connection
has been set up for AD6000W, the
Wi-Fi SETUP indicator starts to blink
green slowly.
To switch the unit to Eco standby mode,
press
again.
To switch the unit on from Eco standby
mode, press
again.
EN
9

Advertisement

loading

  Related Manuals for Philips AD6000W/10