Contents 1 Important Help and support Safety Care for your product Care of the environment 2 Your SoundBar Main unit Remote control Connectors 3 Connect Connect audio from TV and other devices 6 4 Use your SoundBar Adjust the volume Choose your sound MP3 player USB storage devices...
• Before you connect the product to the For extensive online support, visit power outlet, ensure that the power www.philips.com/support to: voltage matches the value printed on the • download the user manual and the quick back or bottom of the product. Never...
• Batteries contain chemical substances, they should be disposed of properly. Risk of swallowing batteries! • The product/remote control may contain When this crossed-out wheeled bin symbol is a coin/button type battery, which can be attached to a product it means that the product swallowed.
Remote control This section includes an overview of the Congratulations on your purchase, and remote control. welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. Main unit This section includes an overview of the main unit. a SURR indicator Lights up when you select Virtual Surround sound.
e USB (USB) Switch your audio source to the USB Audio input from a USB storage device. connection. b AUDIO IN Audio input from an MP3 player (3.5mm Skip to the previous or next track, chapter jack). or file. Rear connectors g TREBLE +/- Increase or decrease treble.
3 Connect Option 2: Connect audio through a digital coaxial cable Good quality audio This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide.
• Make the necessary connections described in the Quick Start Guide or download the User Manual from MP3 player www.philips.com/support. • Switch the SoundBar to the correct source Connect your MP3 player to play your audio for other devices. files or music.
3 - 3.5mm Update software > 25mm To continually improve the product, software upgrade may be offered. Visit ww.philips.com/ For information about how to wall mount your support to check if the latest software version SoundBar, see the quick start guide.
6 Product Main unit specifications • Power supply: 110-240 V~, 50-60 Hz • Power consumption: 40 W • Standby power consumption: ≤ 0.5 W • Speaker impedance: 8 ohm (full range) Note • Speaker drivers: 4 x 54.5 mm (2") • Dimensions (WxHxD): •...
If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.