Troubleshooting Contents Notice Important Safety Help and support Your wireless speaker What’s in the box Overview of the speaker Get started Plug in the power Turn on and o Connect Connect to Wi-Fi (Wireless Operation) 7 Lighting operation Pairing with Ambilight TV Follow Music Mood Light mode Adjust brightness...
• Please use the speaker safely in an For extensive online support, visit environment with temperature between www.philips.com/support to: 0°C and 45°C. • download the user manual and the quick • Only use attachments and accessories start guide specified by the manufacturer.
Ambilight TV mode. • Press to select the LED light mode. Congratulations on your purchase, and welcome to Philips! To fully bene t from the • Press to increase or decrease volume support that Philips o ers, register your •...
• Press and hold to activate the pairing function or disconnect the existing paired Bluetooth device. RESET • Press with a sharp object for 5 seconds to restore factory defaults AUX IN • Audio input socket (3.5mm) for an external audio device. Built-in LED light...
Get started Plug in the power • The speaker is powered by AC input. • Connect the AC IN socket on the speaker to an outlet (19V 2.1A) by using the provided power cable. • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
(such as iPad, iPhone, iPod touch, Fast blink Slow pulse Android phones, etc.) to the same Wi-Fi network, you can then use the Philips Sound app powered by DTS Play-Fi to Launch the Philips Sound App powered control the soundbar to listen to audio les.
Wi-Fi network used by iPhone should be the name list. Otherwise, it follows the switched temporarily to Play-Fi device AP and default name. restart Philips Sound APP to complete the product’s Wi-Fi setup. See the steps below: • • Go to Settings.
Wi-Fi light is changed to slow pulse. Reset the Wi-Fi connection, restart the app and start the setup again. Launch the Philips Sound App powered by • If you want to change from one network to another, DTS Play-Fi.
Ambilight TV pairing is to be You can set the built-in LED light of the done on the TV. speaker to follow the color of your Philips Ambilight TV. Alternatively, you can set the Activate the con guration as shown on...
• Green Nature - Green static color To set the LED light, press the button on the speaker to Mode 1 • Orange – Orange static color “Work with Ambilight” mode. • Lemon – Yellow static color • Lavender – Light Purple static color You can select one of the preset color styles.
LED light O To switch o LED light, press the button on the speaker to Mode 3 “O ”. Overview Mode Ambilight TV LED state Action • Follow Paired Follow the color of Press and hold for 3 seconds Ambilight TV Ambilight TV to enter the pairing mode.
Play Control playback When playing the music Play from Bluetooth devices Press to pause or resume play Adjust the volume With this speaker, you can enjoy audio from your Bluetooth device. Listen to an external device Note • Make sure that the Bluetooth function is enabled on your device.
Update rmware via Philips Sound App (Settings > PS Fine Tune) The rmware for MCU and DSP can be upgraded to the latest version via Philips Sound App powered by DTS Play-Fi. Please go to Settings menu and select PS Fine Tune option to check it out.
Product Network supported Wireless network 802.11 a/b/g/n/ac speci cations 2.4G Wi-Fi transmitter 2412-2472MHz frequency range 2.4G Wi-Fi transmitter 20±2dBm power Note 5G Wi-Fi transmitter 5725-5825MHz • Product information is subject to change without prior frequency range notice. 5G Wi-Fi transmitter 12±2dBm power General information...
If you have problems using this product, check on your Bluetooth device. the following points before you request • Re-pair the unit with your Bluetooth service. If you still have a problem, get support at www.philips.com/support. device. Cannot connect with my Bluetooth device General •...
• When the first time setup is not successful, close the Philips Sound app powered by DTS Play-Fi. Restart the app. • When the speaker was set as Stereo Pairs or Surround sound, the speaker need to be disconnected in the App before use separately.
Directive 2014/53/EU. You can nd the Declaration of Conformity on www.philips.com/support. FCC Statement (USA and Canada only) Care of the environment This device complies with Part 15 of the FCC Disposal of your old product Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Trademark notice For DTS patents, see http://patents.dts.com.Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, Play-Fi, and the DTS Play-Fi logo are registered trademarks or trademarks of DTS,Inc. in the United States and other countries.
Please visit www.philips.com/support for the latest updates and documents. Philips anf the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its a liates, and MMD Hong kong Holding Limited is the warrantor in relation to this product.