Mitsubishi Electric MELSEC Q Series Programming Manual page 43

4 ST PROGRAM EXPRESSIONS
4 - 3
Precaution 1 for use of operator
A conversion error will occur if the applicable data in the right member of an
operator is not the same in data type as the applicable data in the left member.
Precaution 2 for use of operator
The number of used operators that can be described in a single expression is
up to 1024. A conversion error will occur if 1025 or more operators are used.
REMARK
Explanation of ANY type ...
For the explanation of the ANY type, refer to "3.2.2 About ANY type".
4 - 3