Mitsubishi Electric MELSEC Q Series Programming Manual page 281

7 ERROR LIST
No. Error Message
The illegal type is used at
68 the function '*1'. (C10007)
(Function name enters *1.)
7 - 17
Cause
The illegal data type was used for the argument of
the MELSEC function.
Example 1: RST_M(M0, ddev1);
The double word type was specified in
the second argument of function RST_M.
Example 2: DECO_M(M0, Real1, K8, Real2);
The real number type was specified in
the second/fourth argument of function
DECO_M.
Example 3: COMRD_S_MD(M0, ddev1, Str32);
The double word type was specified in
the second argument of function
COMRD_SD_MD.
Corrective Action
Use the variable of correct
data type in the argument.
7 - 17