Interrupt The Timer; Measure Time - Nokia 3155 User Manual

FCC draft
Set the timer
1. In the standby mode, select Menu
Interval timer, or Settings.
Use Normal timer to measure the countdown time for tasks that have one
period (timer name). Select Interval timer
with more than one period.
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
appears in the standby mode with the countdown timer set. When the time
runs out, your device sounds an alarm, displays the timer note, vibrates (if set),
and flashes its lights.
Press any key during the alarm to stop the alarm. After 30 seconds the timer alert
stops automatically.
Change the time
After you have set the timer, you can change the time.
1. In the standby mode, select Menu
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select Start.

Interrupt the timer

After you have set the timer, you can stop the timer. In the standby mode, select
Menu > Organizer > Timer > Stop
Stopwatch
You can use the stopwatch in your device to track time. The stopwatch displays
time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:s format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.

Measure time

1. In the standby mode, select Menu
Lap timing > Start. The running time is displayed.
O r g a n i z e r
> Organizer > Timer > Normal
to save sets of countdown times
> Organizer > Timer > Change
timer.
> Organizer > Stopwatch > Split timing
timer,
time.
or
85