Change The Time; Interrupt The Timer; Stopwatch; Copyright © 2005 Nokia. All Rights Reserved - Nokia 3155 User Manual

Select Interval timer
countdown times with more than
one period.
2. Enter the time (in hh:mm:ss
format), and select OK.
3. Enter a note for the timer, and
select Start.
appears in standby mode with the
countdown timer set. When the time
runs out, your device sounds an alarm,
displays the timer note, vibrates (if
set), and flashes its lights.
Press any key during the alarm to stop
the alarm. After 30 seconds the timer
alert stops automatically.

Change the time

After you have set the timer, you can
change the time.
1. With a normal timer set, in standby
mode, select Menu
Timer > Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a
new note, and select Start.

Interrupt the timer

After you have set the timer, you can
stop the timer. In standby mode, select
Menu > Organiser >
timer.
Copyright © 2005 Nokia. All rights reserved.
to save sets of
> Organiser >
Timer > Stop

Stopwatch

You can use the stopwatch in your
device to track time. The stopwatch
displays time in hours, minutes,
seconds, and fractions of a second in
hh:mm:ss.ss format.
Using the stopwatch or allowing it to
run in the background when using
other features increases the demand
on battery power and reduces the
battery life.

Measure time

1. In standby mode, select
Organiser > Stopwatch
timing or Lap timing
running time is displayed.
Split timing—You can use the split
time function for such things as a
long distance race when you need
to pace yourself. Select
note the lapsed time. The timer
continues to run and the split time
appears below the running time.
Each time you select Split, the new
measured time appears at the
beginning of the list.
Lap timing—You can use the lap
time function when you want to
track how long it takes to complete
each cycle or lap. Select
note the lap time. The clock stops,
then starts immediately from zero.
The lap time appears below the
running time. Each time you select
O r g a n i s e r
Menu >
> Split
> Start. The
Split to
Lap to
67