FCC draft
Color schemes
You can change the color of some display components in your device, such as
indicators and signal bars.
In the standby mode, select
Menu
the color scheme of your choice.
Choose a banner
Banner is a carrier-dependent feature.
If your wireless service provider supports this feature, you can choose whether
the display shows the operator logo when the phone is in the idle state.
In the standby mode, select
Menu
or Customize.
Backlight time-out
You can choose how long to set the backlights on. In the standby mode, select
Menu
>
Settings
>
Main display >Backlight time-out
(to enter the time-out ranging from 15 seconds to 5 minutes).
Mini display settings
Power saver
You can turn the power saver on and off. In the standby mode, select
Settings
>
Mini display
>
Power saver
Tone settings
You can adjust the ringing volume, keypad tones, and more for the active profile.
See "Customize a profile," p. 59 for more information on profile settings.
Select
Menu
>
Settings
>
Tones
and one of the following:
Incoming call
alert—Select how the device notifies you of an incoming call.
Ringing
tone—Select the ringing tone for incoming calls.
Ringing
volume—Set the volume of your ringing tone.
Vibrating
alert—Turn the vibrating alert
Message alert
tone—Select the tone for received messages.
>
Settings
>
Main display
>
Color schemes
>
Settings
>
Main display
>
Banner
>
15 seconds
>
On
or Off.
On
or Off.
S e t t i n g s
and
>
Default
or
Customize
Menu
>
61