Nokia 3155 User Manual page 66

FCC draft
S e t t i n g s
Data or fax calls
Data and fax calling is a network service. See "Network Services," p. 6. If your
wireless service provider supports this feature, you can set up the device to send
or receive data and fax calls with a terminal, such as a PDA or PC, connected.
For better performance during data calls, place the device on a stationary
surface. Do not move the device by holding it in your hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide
which can be downloaded from the Nokia website at http://www.nokia.com/us.
1. In the standby mode, select Menu
Incoming data/fax call and one of the following options:
Normal—The device receives incoming calls as usual.
Data calls only—The device receives only data calls.
Fax calls only—The device receives only fax calls.
2. When finished with receiving the fax or data call, repeat steps 1 and 2, and
select Normal.
Data transfer
You can view the transmission speed when sending or receiving data and fax
calls.
In the standby mode, select Menu
display > Graphic or Off.
Call summary
Your device can display the time spent on a call when you hang up. In the standby
mode, select Menu > Settings > Call
Ringing tone for no caller ID
You can select a different ringing tone for calls received with no caller ID.
In the standby mode, select Menu
ID > On or Off.
66
> Settings > Call > Data/fax calls
> Settings > Call > Data/fax calls
> Call summary > On or Off.
> Settings > Call > Ringing tone for no caller
>
> Data rate