Fixture Putty And Mold Making - Printa Systems 990 series Quick Manual

Step 1: Since many products are
unique in shape, included with the
990 System is fixture putty so you can
secure your product to print. The
putty requires a hardener to cure.
Step 3: Add about a 6" inch
bead of hardener to a palm
sized amount of putty.
Step 6: Place product into
fixture putty. Make sure the
putty goes up at least half of
the product to secure it.
990 Pad Printing System Quick Guide

Fixture putty and mold making.

Step 4: Mix thoroughly by
hand, make sure there are no
swirls as the putty must be an
even color. Mix quick as you
have about a minute.
Step 7: Gently mold
putty around edges of
product to secure
product.
Step 2: Get appropriate amount of
putty to be used. Generally you
want to get an amount a little larger
than your product.
Step 5: Press firmly
into turntable as to
make registration
marks in the bottom
of the putty for future
use.
Step 8: Let sit for at least ten
minutes for the putty to
harden. You now have a
fixture that can be reused for
the same product.
5