Step 1: Clean off pad using
packing tape.
Step 4: Remove doctor
blade. Wipe down with cloth.
Again, a few drops of thinner
may be needed.
Step 7: Place plate on clean
towel. Place a few drops on
plate and wipe down. You
do not need to use lots of
thinner! A little goes along
way!
990 Pad Printing System Quick Guide
Step 2: Gently remove ink
carriage. There will be a lot
of ink on the roller. Use a lint
free cloth to catch ink.
Step 5: Loosen plate keeper
bolts.
Step 8: Flip plate over and
clean off back of plate.
Again, use medium thinner
sparingly.
Cleaning
Step 3: Wipe down roller
with cloth. You may need a
few drops of medium thin-
ner to completely remove
ink.
Step 6: Using knife or small
screwdriver, remove plate
from ink tray.
Step 9. Remove ink tray and
throw in trash. Ink will
harden to ink tray and be
safe to dispose of in several
hours. Install clean parts and
you are ready to start again!
11