Stitch Length; Differential Feed (Models 6 2 4 & 614) - ELNA 624DSE Instruction Manual

Stitch Length
Most overlook sewing projects can be
done w i t h the stitch length set at 2 to 3.
However, you can easily change the stitch
length by shifting the stitch length slide
(a) between 0.5 and 4 , as desired.
®
Differential Feed
(Models 6 2 4 & 614)
1. Your machine is equipped w i t h t w o
feed dogs (a) and (b), each of w h i c h
moves independently. However, w h e n
the differential feed control slide (c)
is set at 1.0, both feed dogs move
together to the same length.
By pushing the differential feed slide
(c) down to a higher number, the front
feed dog (a) moves the fabric faster,
as shown. This helps to prevent knitted
or stretch fabrics from puckering and
waving during sewing.
0
3. By pushing the differential feed slide
(c) up to a lower number, the front feed
dog (a) moves the fabric more slowly,
as shown. This helps to prevent sheer
and lightweight fabrics f r o m puckering.
Always test sew on a scrap of your fabric
before starting garment or craft construc-
tions.
N.B.
Adjustments to the differential feed can
be made while sewing.