Cisco TelePresence Manual page 2

CUCM Integration with Content Server 6.2
Step 4
On the SIP Trunk Security Profile Configuration page, under SIP Trunk Security Profile Information,
enter the following:
Field
Name
Description
Device Security Mode
X.509 Subject Name
Accept Out-of-Dialog
REFER
Accept Unsolicited
Notification
Accept Replaces Header
Step 5
Click Save.
Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide
3-16
Chapter 3 Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence
Setting
Enter SIP Trunk Security Profile or another name.
Enter SIP trunk security profile for Cisco TCS or another description.
If you will not enable CUCM authentication and encryption, accept the
default of Non Secure.
If you will not enable CUCM authentication and encryption, leave this
field blank.
If you will enable CUCM authentication and encryption, enter the name.
This name must match the Subject Name field for the SIP certificate on the
Cisco TCS.
Check this check box.
Check this check box.
Check this check box.