Cisco TelePresence Manual page 18

CUCM Integration with Content Server 6.2
Field
Connected Line ID
Presentation
Connected Name
Presentation
Called Party Transformations
Discard Digits
Called Party Transform
Mask
Prefix Digits (Outgoing
Calls)
ISDN Network-Specific Facilities Information Element
Network Service Protocol From the Network Service Protocol drop-down list box, choose the PRI
Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide
3-32
Chapter 3 Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence
Description
Cisco Unified Communications Manager uses connected line ID
presentation (COLP/COLR) as a supplementary service to allow or restrict
the called party phone number on a call-by-call basis.
Choose whether you want Cisco Unified Communications Manager to
allow or restrict the display of the connected party phone number on the
calling party phone display for this route pattern.
Choose Default if you do not want to change the connected line ID
presentation. Choose Allowed if you want to display the connected party
phone number. Choose Restricted if you want Cisco Unified
Communications Manager to block the display of the connected party
phone number.
CUCM uses connected name presentation (CONP/CONR) as a
supplementary service to allow or restrict the called party name on a
call-by-call basis.
Choose whether you want CUCM to allow or restrict the display of the
connected party name on the calling party phone display for this route
pattern.
Choose Default if you do not want to change the connected name
presentation. Choose Allowed if you want to display the connected party
name. Choose Restricted if you want Cisco Unified Communications
Manager to block the display of the connected party name.
From the Discard Digits drop-down list box, choose the discard digits
instructions that you want to associate with this route pattern. The discard
digits that display depend on the numbering plan that you choose from the
Numbering Plan drop-down list box.
Note
The called party transformation settings that are assigned to the
route groups in a route list override any called party transformation
settings that are assigned to a route pattern that is associated with
that route list.
Enter a transformation mask value. Valid entries for the NANP include the
digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe
(#); the uppercase characters A, B, C, and D; and blank. If the field is
blank, no transformation takes place. CUCM sends the dialed digits
exactly as dialed.
Enter prefix digits in the Prefix Digits (Outgoing Calls) field. Valid entries
for the NANP include the digits 0 through 9; the wildcard characters
asterisk (*) and octothorpe (#); the uppercase characters A, B, C, and D;
and blank.
Note
The appended prefix digit does not affect which directory numbers
route to the assigned device.
protocol that matches the protocol of the terminating gateway.