Turning The Error Alarm On Or Off - Nisca PR-C201 Operation Manual

Turning the Error Alarm On or Off

The initial setting is for the buzzer to sound when an error occurs.
You can set the buzzer so that it does not sound.

You can also change the settings by using the printer driver (→See "Opening the
Note
Printer Driver Settings Screen" on page 87).
1
Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 24 for details on
how to switch to User Mode.
2
Press the  Key until [Printer Setup] is
displayed, then press the SET Key.
3
Confirm that [Buzzer] appears, and
press the SET Key.
4
Change the settings by using the /
Keys, then press the SET Key.
• Pressing the / Keys switches between [ON] and
[OFF].
• Set it to [ON] to sound the buzzer or [OFF] to turn the
buzzer off.
Printer Settings
Normal Mode
MENU
Ready to Print Ready to Print Printer Info. Printer Info.
Printer Info. Printer Info.
SET:>> SET:>>
SET
Printer Setup Printer Setup
Buzzer Buzzer Buzzer Buzzer
SET:>> SET:>>
Buzzer Buzzer
ON ON
SET
Buzzer Buzzer
ON ON
Buzzer Buzzer
ON ON
Buzzer Buzzer
OFF OFF
User Mode
SET:>> SET:>>
31