Timer Function - ProBreeze PB-H02 Instruction Manual

TIMER FUNCTION

Timer
(Fig. 1)
The heater can be set to turn ON and OFF at the time you want. Before setting a
timer, the clock must be set to the correct time. Turn the dial clockwise until the
triangular pointer is pointing at the correct time. Do not turn the clock anti-clockwise.
There are 96 segments around the dial - each representing 15 minutes of the day.
Setting the Timer
1. Plug in the heater.
2. Set the power and temperature to the desired settings.
3. Turn the dial clockwise to set the clock to the current time of the day.
4. Push the segments outwards for the period you want the heater on. For example,
the diagram above shows the heater will turn on between 1AM to 3AM (Fig.2).
5. Push the timer switch to the clock symbol.
6. Once you have set the segments for the desired heating period, the heater will
cycle on and off according to these settings.
7. Once unplugged, the heater timer will stop and will need to be reset.
Note: When you first use the heater, all 15 minute segments should be inwards. To
begin using the timer, push the segments outwards that represent the time of the
day you want the heater to work. The heater will switch off again after that period
has elapsed.
5 | English
Triangluar Point
Segments
Current Time 8:00AM
8 Segments Outwards
(Fig. 2)
Timer Switch