Operation - ProBreeze PB-H02 Instruction Manual

OPERATION

1. Place the heater upright on a flat, steady and heat-resistant surface.
2. Turn the thermostat dial anti-clockwise to LOW and ensure the power switch is
'O' OFF.
3. Insert the plug into a suitable socket.
4. Turn the power switch dial clockwise to the desired power:
• 'I' – Low Heat
• 'II' – Medium Heat
• 'III' – High Heat
5. Turn the thermostat dial clockwise until you hear a click and the light turns on.
The position of the click indicates the temperature of the room. Turning the
thermostat clockwise will keep the radiator on until the room gets warmer.
Turning it anti-clockwise will turn it off until the room has cooled to a lower
temperature and then it will switch on. The radiator automatically rotates through
an on-and-off cycle to maintain the current room temperature according to the
thermostat's setting. It is normal for it to heat up and cool down periodically.
NOTE: IF THE HEATER DOES NOT TURN ON, ENSURE THE TIMER SWITCH
IS SET TO 'I'.
6. To turn off the heater, turn the power switch dial anti-clockwise to "O" OFF.
7. Unplug the heater from the electrical outlet when it is left unattended or is not in
use.
English | 4