Timer Function - ProBreeze PB-H02 Instruction Manual

5. Turn the thermostat dial clockwise until you hear a click and the light turns on.
The position of the click indicates the temperature of the room. Turning the
thermostat clockwise will keep the radiator on until the room gets warmer.
Turning it anti-clockwise will turn it off until the room has cooled to a lower
temperature and then it will switch on. The radiator automatically rotates through
an on-and-off cycle to maintain the current room temperature according to the
thermostat's setting. It is normal for it to heat up and cool down periodically.
NOTE: IF THE HEATER DOES NOT TURN ON, ENSURE THE TIMER SWITCH
IS SET TO 'I'.
6. To turn off the heater, turn the power switch dial anti-clockwise to "O" OFF.
7. Unplug the heater from the electrical outlet when it is left unattended or is not in
use.

TIMER FUNCTION

Timer
(Fig. 1)
The heater can be set to turn ON and OFF at the time you want. Before setting a
timer, the clock must be set to the correct time. Turn the dial clockwise until the
triangular pointer is pointing at the correct time. Do not turn the clock anti-clockwise.
There are 96 segments around the dial - each representing 15 minutes of the day.
5 | English
Triangluar Point
Segments
Current Time 8:00AM
8 Segments Outwards
(Fig. 2)
Timer Switch