Emerson Unidrive M600 Installation Manual page 22

Figure 3-6 Brake resistor with the mounting bracket
1. Ground connection (1 x M4 nut and washer).
2. Attaching the brake resistor to the mounting bracket (using 2 x M4 screws and nuts).
Figure 3-7 Mounting bracket dimensions
Æ 4.5 mm (0.18 in)
x 2 holes
22
1
118 mm (4.65 in)
Æ 4.5 x 6 mm (0.18 in)
x 2 holes
80 mm (3.15 in)
130 mm (5.12 in)
2
15.5 mm
(0.61 in)
1.5 mm
(0.06 in)
30.5 mm
(1.20 in)
Unidrive M Frame 5 to 6 Power Installation Guide
R = 1.5 mm
(0.06)
Issue Number: 3