Section 6: Aftermarket Accessories From Grizzly - Grizzly G0651 User Manual

aCCessories
SEcTION 6: AFTERMARKET
AccESSORIES FROM GRIzzLy
Some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. To minimize this
risk, only install accessories recommended
for this machine by Grizzly.
NOTICE
Refer to the newest copy of the Grizzly
catalog for other accessories available for
this machine.
h8085—Front Tool Box for G0651/G0652
this heavy-duty tool box features powder coated
paint and ball bearing slides. 25"l x 22
15"d.
Figure 96. model h8085 tool Box.
T21880—zero clearance Insert for G0651/
G0652
made especially for the g0651/g0652 table saw.
height is easily adjustable. special phenolic mate-
rial.
model g0651/g0652 (mfg. since 1/10)
h7583—Grizzly Tenoning Jig
our fully adjustable tenoning jig handles stock
up to 3
angle with a 90° to 75° range. the two large grip
handles, adjustable guide bar, multi-position con-
trol levers, and extra large clamping handwheel
will ensure accurate and repeatable results. a top
seller!
Figure 97. model h7583 tenoning Jig.
"h x
/
1
2
G4173—Baby power Feeder 110V
G4176—
G4179—
G4181—1 hp power Feeder 220V
installing a power feeder on your table saw will
make repetitive cuts much easier and safer.
Can be installed on nearly any table saw. easy
to adjust wherever needed, including out of the
way when not needed! a must for any production
shop.
⁄ " thick and features an adjustable bevel
1
4
⁄ hp power Feeder 110V
1
4
⁄ hp power Feeder 220V
1
2
Figure 98. g4179 power Feeder.
-61-